---
title: "Changing the date and time for multiple Flights"
slug: "changing-the-date-and-time-for-multiple-flights"
updated: 2023-11-29T20:21:15Z
published: 2023-11-29T20:21:15Z
canonical: "help.dsp.samsungads.com/changing-the-date-and-time-for-multiple-flights"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.dsp.samsungads.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Changing the date and time for multiple Flights

When creating a Campaign and setting up the flights, it may be useful to adjust some settings to improve the light's performance and reachability. For example, you could extend the Flights end date.

This can be done by performing *Batch Actions* on all flights which target those segments. The same date and time settings can thereby be applied to multiple flights in batch instead of individually changing the date and time.

The following steps can be taken to change the date and time setting for multiple flights via a *Batch Action* operation.

1. On the *Campaign Show* page, select the Campaign whose multiple Flights you wish to assign the date and time setting.
2. On the *Campaign Edit* page, select at least two flights by ticking their respective checkboxes to enable the *Batch Actions* button.  

![](https://cdn.document360.io/287afab9-a086-4024-a782-6cbdb167f005/Images/Documentation/image-1687848690238.png?sv=2026-02-06&spr=https&st=2026-11-11T11%3A40%3A19Z&se=2026-11-11T12%3A40%3A19Z&sr=c&sp=r&sig=N5Gl1GroT6YqFJSPNUdT3ZOWU%2FB5xkHsPeYVOwwN1s8%3D)
3. Click on **Batch Actions** and select **Edit flights**.

          
          

You will be directed to the *New Batch Edit* page.

1. For the *Batch operation name* field, you can leave this field as is or enter a new description. ![image.png](https://cdn.document360.io/287afab9-a086-4024-a782-6cbdb167f005/Images/Documentation/image-FJV400D8.png?sv=2026-02-06&spr=https&st=2026-11-11T11%3A40%3A19Z&se=2026-11-11T12%3A40%3A19Z&sr=c&sp=r&sig=N5Gl1GroT6YqFJSPNUdT3ZOWU%2FB5xkHsPeYVOwwN1s8%3D)
2. In the *Search and Edit Parameters* section, you can either type the setting you want to change in the search bar or select it from the drop-down list.
  1. To update the date and time, click on **Strategy**, then **Schedule**.
  2. Tick the *From* checkbox to edit the date, time, and time zone. The same logic applies to the *To* checkbox.

          
          

You can either type the time zone you want to apply in the search bar or select it from the drop-down list.

1. After editing the parameters as required, click on **Add to Changes**. Your changes will be reported in the *Updated Fields* section.  

![](https://cdn.document360.io/287afab9-a086-4024-a782-6cbdb167f005/Images/Documentation/b94ddedf-e2a5-4096-846d-cfc9c9cbc167.png?sv=2026-02-06&spr=https&st=2026-11-11T11%3A40%3A19Z&se=2026-11-11T12%3A40%3A19Z&sr=c&sp=r&sig=N5Gl1GroT6YqFJSPNUdT3ZOWU%2FB5xkHsPeYVOwwN1s8%3D)
2. By default, the **Send an email notification when the process is finished** is checked and will email you once the batch action is completed. You may untick that checkbox if you do not wish to receive an email notification.
3. Click on **Confirm Changes** to apply your changes.
4. In the lower left-hand corner, a toast message will invite you to click on the details hyperlink to see your task on the *Batch Actions* page.